EN 10028:2 P265GH

  • P265GH

We stock boiler plate steel.

  • Ready to be supplied as plate, cut plate, or profiles (cut shapes).
  • EN 10028:2 P265GH Certified plates are available from Brown McFarlane Limited.
  • Closest equivalent EN standard to the withdrawn German specification DIN 17155 HII
To find out more about this or any of our other products contact us.

Requirements

Chemical Requirements

(cast analysis, % by mass, maximum permitted unless indicated otherwise)

CSiMnPS
0.25 max 0.10 - 0.35 0.60 - 1.40 0.030max 0.030max
Cr* Cu* Mo* Ni*  
0.25 max 0.30max 0.10max 0.30max  

Tensile Requirements

Product ThicknessYield Strength MPaTensile Strength MPaElongation A%
up to 16 mm 265 min 410 to 530 22 min
16 to 40 mm 255 min 410 to 530 22 min
over 40 to 60 mm 245 min 410 to 530 22 min
over 60 to 100 mm 215 min 410 to 530 22 min
over 100 to 150 mm 200 min 400 to 530 22 min
over 150 to 250 mm 185 min 390 to 530 22 min

Values

Impact energy values for the normalised condition.

 -20°C0°C+20°C
Transverse 27J min 34J min 40 J min

Strength

Min. values for proof strength Rp0,2 (MPa) at elevated temperatures.

Thickness50°C100°C150°C200°C250°C300°C350°C400°C
up to 16 mm 256 241 223 205 188 173 160 150
16 to 40 mm 247 232 215 197 181 166 154 145
over 40 to 60 mm 237 223 206 190 174 160 148 139
over 60 to 100 mm 208 196 181 167 153 140 130 122
over 100 to 150 mm 193 182 169 155 142 130 121 114
over 150 to 250 mm 179 168 156 143 131 121 112 105