Estructuras Offshore

EN 10025 S355 J2+N, EN 10025 S355 K2+N, C/W -40 Degrees IMPACT TEST, EN10204 3.2 Lloyds.
EN 10225 S355 G3+N, EN 10225 S355 G8+N, EN 10225 S355 G10+N, THROUGH THICKNESS TESTED Z35 (at 25mm and above ) EN10204 3.2 Lloyds.

We can provide a complete solution covering multi-products to meet your specific project needs. We can also leverage our mill relationships and reserves to secure fast track rollings to suit and this service is available for worldwide distribution.
- Supplied in as rolled, normalised and quenched and tempered condition as applicable.
- Brown McFarlane carries a wide range of structural and offshore steel plate to satisfy offshore contractors and steel fabricators in a full range of plate sizes up to 20 m long and 4 m wide in the thickness range 3 mm to 200 mm.
Offshore & Structural Steel Plate.

From the most basic structural grade through to highly specialised project related specifications, steel is available shot blasted and primed from stock and can be cut to size.

In addition plates to EN 10025 S355K2+N are available from stock with restricted chemistry and low CEV for jobs where basic high yield structural steel will not be good enough to meet your client’s material specifications.

Scroll for more information

Specifications

Certification is available to all the major classification societies such as ABS,Lloyds, D.N.V, B.V etc
Normalised, fully killed, fine grain, vacuum degassed
Sulphur content restricted to 0.005% maximum
Impact tested
Through thickness tested
Ultrasonically tested

Thicknesses: 3mm - 340mm

Widths: 2m, 2.5m, 3m, 3.5m, 4m.

Lengths: up to 20m