Our S355 steel plate is available up to thicknesses of 200mm.
The range includes grades and specifications:
- EN 10025 S355 J2+N, EN 10025 S355 K2+N, C/W -40 Degrees IMPACT TEST, EN10204 3.2 Lloyds.
- EN 10225 S355 G8+N, EN 10225 S355 G10+N, THROUGH THICKNESS TESTED Z35 (at 25mm and above) EN10204 3.2 Lloyds.
Structural Steel Plate – Grade S355
In addition, plates to EN 10025 S355K2+N are available from stock with restricted chemistry and low CEV for jobs where basic high yield structural steel will not be good enough to meet your client’s material specifications.
Offshore Steel Plate – Grade S355
Our S355 steel for offshore use is supplied as rolled, normalised, and quenched and tempered condition as applicable.
Brown McFarlane carries a wide range of structural and offshore steel plate to satisfy offshore contractors and steel fabricators in a full range of plate sizes up to 20m long and 4m wide in the thickness range 3mm to 200mm.
Offshore & Structural Steel Plate.
From the most basic structural grade through to highly specialised project related specifications, steel is available shot blasted and primed from stock and can be cut to size.
In addition plates to EN 10025 S355K2+N are available from stock with restricted chemistry and low CEV for jobs where basic high yield structural steel will not be good enough to meet your client’s material specifications.
- Machinery parts
- Mechanical engineering
- Oilfield fabrications
- Plate girders
- Secondary Structures/Seafastenings
- Storage tanks
- Offshore Wind Foundations
- Floating Structures
- Traditional Offshore Jackets & Piles
- Subsea structures
- Calm Bouys
- Bridges & Stadia nodes etc.