Phone Icon +44 (0)330 221 1106
Mobile Bars IconMobile Bars Close Icon

EN 10028-2 Chrome Moly Plate

Plate for pressure vessel purposes.
More information about the EN 10028-2 standard:

• The full designation of the standard is «Flat products made of steels for pressure purposes».
• The standard covers non-alloy and alloy steels with specified elevated temperature properties.
• Also covered are chrome moly material grades with varying quantities of chromium and molybdenum.
• EN 10028-2 steels found in the table below, such as 16Mo3 are broadly equivalent to those in the American standards ASME SA387 and ASTM A387.

EN 10028-2 Chrome Moly Plate

Plate for pressure vessel purposes.
More information about the EN 10028-2 standard:

• The full designation of the standard is «Flat products made of steels for pressure purposes».
• The standard covers non-alloy and alloy steels with specified elevated temperature properties.
• Also covered are chrome moly material grades with varying quantities of chromium and molybdenum.
• EN 10028-2 steels found in the table below, such as 16Mo3 are broadly equivalent to those in the American standards ASME SA387 and ASTM A387.

More information

EN 10028-2 Chrome Moly Plate.
Brown McFarlane supplies chrome moly plates to EN 10028-2 and, when required by our customers, can offer cut-to-size plates and profiles to meet exact design requirements.
The tables below give information relating to the chrome moly grades that are available from Brown McFarlane.

Applications

  • Flanges
  • Heat exchangers
  • High temperature ducting
  • Pipe clamps
  • Pressure vessels
  • Valves
GET IN TOUCH

Properties

Chemical Requirements
(cast analysis, % by mass, maximum permitted unless indicated otherwise)

Element 16Mo3 13CrMo4-5 13CrMoSi5-5 10CrMo9-10 12CrMo9-10 X12CrMo5 X10CrMoVNb9-1
C 0.12 – 0.20 0.08 – 0.18 0.17 0.08 – 0.14 0.10 – 0.15 0.10 – 0.15 0.08 – 0.12
Si 0.35 0.35 0.50 – 0.80 0.50 0.30 0.50 0.50
Mn 0.40 – 0.90 0.40 – 1.00 0.40 – 0.65 0.40 – 0.80 0.30 – 0.80 0.30 – 0.60 0.30 – 0.60
P 0.025 0.025 0.015 0.020 0.015 0.020 0.020
S 0.010 0.010 0.005 0.010 0.010 0.005 0.005
N 0.012 0.012 0.012 0.012 0.012 0.012 0.03 – 0.07
Cr 0.30 0.70 – 1.15 1.00 – 1.50 2.00 – 2.50 2.00 – 2.50 4.00 – 6.00 8.00 – 9.50
Cu 0.30 0.30 0.30 0.30 0.25 0.30 0.30
Mo 0.25 – 0.35 0.40 – 0.60 0.45 – 0.65 0.90 – 1.10 0.90 – 1.10 0.45 – 0.65 0.85 – 1.05
Nb 0.06 – 0.10
Ni 0.30 0.30 0.30 0.30 0.30
V 0.18 – 0.25

Mechanical Properties

Mechanical properties for plates thicker than 16 mm up to 40 mm thick applicable to the transverse direction

Yield (MPA) minimum Tensile (MPA) Elong.A (%) minimum Impact (J) minimum
16Mo3 270 440 – 590 22 31
13CrMo4-5 290 450 – 600 19 31
13CrMoSi5.5 310 510 – 690 20 34
10CrMo9-10 300 480 – 630 18 31
12CrMo9-10 355 540 – 690 18 70
X12CrMo5 320 510 – 690 20 40
X10CrMoVNb9-1 445 580 – 760 18 40

Request product data sheet

Este formulario se encuentra actualmente en mantenimiento. Por favor, inténtalo de nuevo más tarde.

Get in Touch

Este formulario se encuentra actualmente en mantenimiento. Por favor, inténtalo de nuevo más tarde.