steel plates

We carry a range of pressure vessel plate stock certified to EN 10028:3 P460NL1.

  • The specification EN 10028:3 covers a range of weldable fine grain steels.
  • Supplied in the normalised condition and intended for pressure purposes.

Requirements

Chemical Requirements

(cast analysis, % by mass, maximum permitted unless indicated otherwise)

CSiMnPSAltotal*NCr
0.20 0.60 1.10-1.70 0.025 0.015 0.020 min 0.025 0.30
Cu** Mo Nb Ni Ti V Nb+Ti+V  
0.70 0.10 0.05 0.80 0.03 0.20 0.22  

Tensile Requirements

Product ThicknessYield Strength MPaTensile Strength MPaElongation A%
up to 16 mm 460min 570 to 730 17min
16 to 40 mm 445min 570 to 720 17min
over40 to 60 mm 430min 570 to 720 17min
over 60 to 100 mm 400min 540 to 710 17min

Values

Transverse

-50 oC-40oC-20oC0oC+20oC
- 27J min 35 J min 50 Jmin 60 J min

Longitudinal

-50oC-40oC-20oC0 oC+20oC
30 J min 40 J min 50 J min 70 J min 80 J min

steel plates

Pressure vessel steel certified to EN 10028:3 P460NL2 is held in stock by Brown McFarlane Ltd.

  • Can be supplied as plates and cut profiles.
  • The specification EN 10028:3 covers a range of weldable fine grain steels supplied in the normalised condition and intended for pressure purposes.

Requirements

Chemical Requirements

(cast analysis, % by mass, maximum permitted unless indicated otherwise)

CSiMnPSAltotal*NCr
0.20 0.60 1.10-1.70 0.020 0.010 0.020 min 0.025 0.30
Cu** Mo Nb Ni Ti V Nb+Ti+V  
0.70 0.10 0.05 0.80 0.03 0.20 0.22  

Tensile Requirements

Product ThicknessYield Strength MPaTensile Strength MPaElongation A%
up to 16 mm 460min 570 to 730 17min
16 to 40 mm 445min 570 to 720 17min
over40 to 60 mm 430min 570 to 720 17min
over 60 to 100 mm 400min 540 to 710 17min

Values

Transverse

-50 oC-40 oC-20 oC0 oC+20 oC
27 J min 30 J min 40 J min 60 J min 70 J min

Longitudinal

-50oC-40oC-20oC0 oC ;+20oC
42 ;J min ; 45 J min ; 55 J min ; 75 J min ; 85 J min ;

steel plates

Brown McFarlane holds stocks of pressure vessel plate steel certified to EN 10028:3 P460NH.

  • Ready to be supplied as plate and cut profiles.
  • The specification EN 10028:3 covers a range of weldable fine grain steels supplied in the normalised condition and intended for pressure purposes.

Requirements

Chemical Requirements

(cast analysis, % by mass, maximum permitted unless indicated otherwise)

CSiMnPSAltotal *NCr
0.20 0.60 1.10-1.70 0.025 0.015 0.020 min 0.025 0.30
Cu** Mo Nb Ni Ti V Nb+Ti+V  
0.70 0.10 0.05 0.80 0.03 0.20 0.22  

Tensile Requirements

Product Thickness>Yield Strength MPa>Tensile Strength MPa >Elongation A%>
up to 16 mm 460 min 570 to 730 17 min
16 to 40 mm 445 min 570 to 720 17 min
over 40 to 60 mm 430 min 570 to 720 17 min
over 60 to 100 mm 400 min 540 to 710 17 min

Values

Impact energy values for the normalised condition

 -20oC0oC+20oC
Transverse 30 J min 40 J min 50 J min
Longitudinal 45 J min 65 J min 75 J min

Strength

Min. values for proof strength Rp0,2 (MPa) at elevated temperatures

Thickness50oC100oC150oC200o250oC300oC350o400o
up to 16 mm 445 419 388 356 326 300 278 261
16 to 40 mm 430 405 375 345 316 290 269 253
over 40 to 60 mm 416 391 362 333 305 281 260 244
over 60 to 100 mm 387 364 337 310 284 261 242 227

steel plates

Brown McFarlane carries a range of 460 yield structural plate stock certified to EN 10025:3 P460N.

  • The plates can be supplied straight from stock, cut to size, or profiled to specific shapes.
  • The specification EN 10025:3 covers weldable structural steels manufactured with a fine grain structure and supplied in the normalised condition or in an equivalent condition obtained by normalised rolling.

Requirements

Chemical Requirements

(cast analysis, % by mass, maximum permitted unless indicated otherwise)

C Si Mn P S Altotal * N Cr
0.20 0.60 1.00-1.70 0.030 0.025 0.020 min 0.025 0.30
Cu ** Mo Nb Ni Ti V Nb+Ti+V Mo+Cr
0.55 0.10 0.05 0.80 0.05 0.20 0.22 0.30

Tensile Requirements

Product ThicknessYield Strength MPaTensile Strength MPaElongation A%*
up to 16 mm 460min 540 to 720 17min
16 to 40 mm 440min 540 to 720 17min
over40 to 63 mm 430min 540 to 720 17min
over 63 to 80 mm 410 min 540 to 720 17 min
over 80 to 100 mm 400min 540 to 720 17min
over 100 to 150 mm 380 min 530 to 710 17 min
over 150to 200 mm 370 min 530 to 710 17 min

Values

Impact energy values for the normalised condition

Longitudinal

-50 oC-40oC-20oC-10oC0oC+20oC
- - 40J min 43 J min 47J min 55J min

Transverse

-50oC-40oC-20oC-10oC0 oC+20oC
- - 20 J min 24 J min 27J min 31J min

steel plates

460 yield structural steel plates certified to EN 10025:3 S460NL form part of Brown McFarlane's standard product range.

  • The plates can be supplied straight from stock, cut to size, or profiled to specific shapes.

Requirements

Chemical Requirements

(cast analysis, % by mass, maximum permitted unless indicated otherwise)

CSiMnPSAltotal*NCr
0.20 0.60 1.00-1.70 0.025 0.020 0.020 min 0.025 0.30
Cu** Mo Nb Ni Ti V Nb+Ti+V Mo+Cr
0.55 0.10 0.05 0.80 0.05 0.20 0.22 0.30

Tensile Requirements

Product ThicknessYield Strength MPaTensile Strength MPaElongation
up to 16 mm 460 min 540 to 720 17 min
16 to 40 mm 440 min 540 to 720 17 min
over 40 to 63 mm 430 min 540 to 720 17 min
over 63 to 80 mm 410 min 540 to 720 17 min
over 80 to 100 mm 400 min 540 to 720 17 min
over 100 to 150 mm 380 min 530 to 710 17 min
over 150 to 200 mm 370 min 530 to 710 17 min

Values

Impact energy values for the normalised condition

Longitudinal

-50 oC-40 oC-30oC-20 oC-10oC0 oC+20 oC
27 J min 31 J min 40 J min 47 J min 51 J min 55 J min 63 J min

Transverse

-50oC-40oC-30oC-20oC-10oC0 oC+20oC
16 J min 20 J min 23 J min 27 J min 30 J min 34 J min 40 J min